Ðóñ
Eng
It is designed for transportation of rolling equipment across underground workings of mines and pits with a gradient up to0.005 and track bending radius minimum8 m, where the current safety regulations permit operation of accumulator locomotives. The locomotive is manufactured according to the Technical Specifications ÒU 30.20.11-002-34743863-2019
Technical characteristics
| Serial no. | Designation of basic parameters and dimensions | Unit of measure | Value |
| 1. | Traction effort in hours mode: | ||
| -for a track 600 | kN | 10 | |
| -for a track 900 | 10 | ||
| 2. | Speed in hours mode: | ||
| -for a track 600 | km/h | 7,5 | |
| -for a track 900 | 8,1 | ||
| 3. | Railway electric motor power in hours mode | kWt | 20(2×10) |
| 4. | Accumulator battery power capacity | kWt/÷ | 58-75 |
| 5. | Accumulator battery type | TNZHSH,PzS | |
| 6. | Rigid wheelset | mm | 1200 |
| 7. | Nominal track rail gage | mm | 600, 900 |
| 8. | Overall dimensions: | ||
| -length over buffers | mm | 4200 | |
| -track gage 600 | 1050 | ||
| -track gage 900 | 1350 | ||
| -height | 1450 | ||
| 9. | Nominal wheel diameter on tread | mm | 680 |
| 10. | Mass | kg | 7000 |
| 11. | Sand system | manual mechanic | |
| 12. | Electric equipment version | “RV” | |
| 13. | Accumulator battery version | “RP” | |